Digitax HD M750 Ethernet
Kategori: Servo Sürücü Ve Motorlar
Digitax HD M750 Ethernet is a network servo drive for centralized and decentralized motion applications, featuring multi-protocol Ethernet ports enabling support of:
PROFINET RT
EtherNet/IP
Modbus TCP/IP and
real-time Ethernet with RTMoE (Real-Time Motion over Ethernet).
The Digitax HD M750 Ethernet servo drive also hosts the on-board Advanced Motion Controller for distributed 1.5 axis motion control.
Open, efficient, synchronized Ethernet
Maximize machine productivity through high performance deterministic Ethernet. Access future developments in IT-based industries where billions of nodes are installed, future proofing your investments. Ethernet webpages hosted onboard the M750 Ethernet drive
RTMoE
Digitax HD’s standard Ethernet also supports RTMoE (Real-Time Motion over Ethernet) which provides synchronized communication between drives using the Precision Time Protocol as defined by IEEE1588 V2. Distributed clocks are used to automatically synchronize the position, speed and current loops across all drives.
Minimum size, maximum performance!
Due to our innovative design you only increase drive size when option modules are used, achieving significant space saving in the overall configuration.
See the "Options & Accessories" section below for details about the flexibility of Digitax HD M750 Ethernet.
Features
Maximum performance
300% peak current performance pulse-duty overload
Optimized control loops for high dynamic performance
Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
Supports a wide range of feedback technologies including EnDat 2.2, Hiperface SinCos, Incremental Quadrature, SinCos, BiSS-C, SSI, Resolvers and others.
Maximum performance package with high torque density, low inertia Unimotor hd servo motors
Supports RTMoE (Real-Time Motion over Ethernet) which provides synchronized communication between drives using the Precision Time Protocol as defined by IEEE1588 V2:
Distributed clocks are used to automatically synchronize the position, speed and current loops across all drives
1 ms cycle time for synchronous cyclic data
High speed network synchronization of less than 1 μs jitter (typically (typically <200 ns) and 1 ms cycle time for synchronous cyclic data
Multi-protocol Ethernet support of EtherNet/IP or PROFINET RT in addition to Modbus TCP/IP, HTTP and SMTP
Advanced 1.5 axes Motion Controller, key features include:
250 μs cycle time
Motion profile generator
Electronic gearbox
Interpolated cam
Homing functions
High speed position freeze
Minimum size
40 mm drive width and option bracket adds 22 mm, providing a maximum drive width of 62 mm;
Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard);
Fits into cabinets just 200 mm deep.
Easy installation and setup
DIN rail alignment;
Kits for easy multi-axis installation;
Single motor cable and electronic motor name plate for fast set up;
Seamless motor-drive pairing with Unimotor hd servo motors;
Easy access pluggable connectors;
Rapid commissioning with the Connect PC tool and SD cards;
Flexibility
Two option slots to add features and functionality for Communication, Feedback, I/O and/or Machine Controller (please see `Options & Accessories` section for details)
Multi-protocol Ethernet
Safety on-board
Reduced downtime with machine safety
- Integrated dual Safe Torque Off (STO)
- Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)
- Safe motion and CIP Safety with MiS250 option
Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features;
Programmable with IEC61131 standard languages.
